“Make Offer" is the best way to get the lowest price on gear. Enter contact info, provide an offer and click the "Make Offer" button. Our pricing team will review your offer and in the event that your offer is too low a counter offer will be sent. You are free to accept or decline. Inventory is not secured until checkout and availability is subject to change.
- Cardioid pattern
- Frequency response 30-20,000Hz
- Low frequency roll-off: 80Hz, 12dB/octave
- Maximum input sound level: 145dB SPL, 1kHz @1% distortion; 155dB SPL, with 10dB pad (nominal)
- Noise 17dB SPL
- Dynamic range (typical) 128dB, 1kHz at max SPL
- S/N ratio 77dB
The Audio-Technica AT4033CL Large Diaphragm Condenser Mic uses transformerless circuitry to virtually eliminate low-frequency distortion and enhance the capture of high-speed transients. An 80Hz high-pass filter easily switches between flat frequency response and a low-end roll-off that diminishes ambient noise and popping with closely-miked vocals. Requires 48V phantom power. Includes AT8449 shockmount.
| Audio-Technica AT4033CL Large Diaphragm Condenser Microphone Specifications: |
|---|
| Element |
| Fixed-charge back plate, permanently polarized condenser |
| Polar Pattern |
| Cardiod |
| Frequency Response |
| 30-20,000 Hz |
| Low Frequency Roll-Off |
| 80 Hz, 12 dB/octave |
| Open Circuit Sensitivity |
| -32 dB (25.1 mV) re 1V at 1 Pa |
| Impedance |
| 100 ohms |
| Maximum Input Sound Level |
| 145 dB SPL, 1 kHz at 1% T.H.D.;155 dB SPL, with 10 dB pad (nominal) |
| Noise |
| 17 dB SPL |
| Dynamic Range (typical) |
| 128 dB, 1 kHz at Max SPL |
| Signal-To-Noise Ratio |
| 77 dB, 1 kHz at 1 Pa |
| Phantom Power Requirements |
| 48V DC, 3.2 mA typical |
| Switches |
| Flat, roll-off; 10 dB pad (nominal) |
| Output Connector |
| Integral 3-pin XLRM-type |
| Product: | Period: |
| Audio-Technica AT4033/CL | 5 Year |
-
- (1) Audio-Technica AT4033
- (1) AT8449 shock-mount
- (1) Dust Cover
- (1) Protective Carrying Case
- (1) Spec Sheet & Warranty












