PRO AUDIO
MOBILE STUDIO
Taylor

Taylor
January 15, 2013

Moog Factory Tour: Testing and Calibration

In this part of our Moog Factory Tour series, Jim Debardi discusses the testing and calibration process involved after the manufacturing of the Minimoog synthesizer. The testing and calibration process described here is not just for Minimoogs, but it’s a careful and precise process that is done to every instrument before it leaves the factory. Having every instrument go through a rigorous quality control process is something Moog prides itself on and is a great peace of mind for Moog instrument users. This process is often times very specific to a certain instrument so Moog tapped their engineering department to develop testing devices that exist solely for the purpose of testing Moog instrument functions. Because Moog is dedicated to manufacturing their instruments by hand, they similarly dedicate time and effort into having a human element involved when testing the quality of an instrument’s build. This shouldn’t be a surprise to some when considering …

PRO AUDIO
MOBILE STUDIO
Taylor

Taylor
December 27, 2012

Moog Factory Tour: Etherwave Theremin

In this part of our Moog Factory Tour series, Jim Debardi explores the history of the theremin and its relation to Moog Music Inc. The theremin is not only the oldest electronic instrument, but it’s also the instrument that laid the groundwork for Bob Moog’s legacy with electronic instruments and synthesizers. Be sure to check out our Moog Factory Tour Introduction and be on the lookout for the remaining parts of this series.

Just like in our last post, we will use this post to give you the latest news from Moog Music Inc. On the heels of the release of the Animoog V2 iPad App comes the incorporation of the Grateful Dead Expansion Pack. This pack takes the sounds from the Grateful Dead’s Feb. 14th 1968 performance at the Carousel Ballroom and turns it into a pack that features 82 presets and 45 timbres for use within the …

PRO AUDIO
MOBILE STUDIO
Taylor

Taylor
December 20, 2012

Moog Factory Tour: An Introduction

While at Moogfest 2012 we were fortunate enough to have Orbital and Chad Hugo demo the sounds they created for the new all white Moog Slim Phatty. We also got an exclusive demonstration of using control voltage with the Moog Minitaur and a selection of Moogerfooger pedals. Even after the amazing shows at Moogfest we still wanted more Moog so we asked Jim Debardi to take us on a tour of the Moog Factory to show us how they make their instruments, the history behind Bob Moog and the factory, and a sneak peek into the new technologies they are designing.

In our introductory video Jim gives us a brief history of Bob Moog while also providing some infromation as to how the inner workings of the factory function. All Moog products are hand made (with the exception of the t-shirts, hats, and knick-knacks we couldn’t leave Asheville without) …

PRO AUDIO
MOBILE STUDIO
Taylor

Taylor
December 7, 2012

Moog Moogerfooger Pedals: Using Control Voltage

In our last piece of exclusive content on the Moog Minitaur and Moog Moogerfooger pedals, Amos showed off how to integrate multiple analog synthesizers into your performance or production. This time Amos shows off the control voltage functionality on the Moogerfooger pedals. For those of you already familiar with control voltage and its applicable uses, you can watch the video to see how Amos uses CV with the Moogerfooger pedals. For those of you unfamiliar with control voltage, here is a brief explanation:

Control Voltage Explained

Voltage is the measurement of how much power is passing through a circuit. Control voltage is typically used to control the pitch or the parameters of an analog synthesizer. This varies in application based on the type of electronic device you are using. For example when voltage is increased on an amplifier it increases the volume. Control voltage for analog synthesizers is used to control the …

PRO AUDIO
MOBILE STUDIO
Taylor

Taylor
November 27, 2012

Creating Analog Sounds: Moog Minitaur and Moogerfooger Pedals

While at the Moog Sound Lab during Moogfest 2012 we got an exclusive overview of how to integrate the Moog Minitaur analog bass synthesizer with a series of Moogerfooger pedals. Amos Gaynes walked us through some of the signature sounds on the Minitaur while tweaking his pre-made sequence using the MF-102 Ring Modulator, the MF-103 12 Stage Phaser, and the MF-104M Analog Delay.

Taking advantage of analog sounds is a great way to expand your production or performance. The Moog line of analog synthesizers provide specific tonal and sonic capabilities that could take you hours or days trying to emulate digitally with software. Here are some more specific features of each of these devices:

Moog Minitaur

While on the surface the Moog Minitaur looks limited, it is actually quite expansive with the ability to load and store 100 presets within the Minitaur’s internal memory. This is something new that Moog have …