QSC K12 12" Powered 2 Way PA Speaker Pair w/ KSUB Subwoofers & M20 Poles

QSC K12 12" Powered 2 Way PA Speaker Pair w/ KSUB Subwoofers & M20 Poles

Be the first to review this product

$3,959.96

In stock

Free Shipping*

Buy now and earn 7918 Unique Reward Points.

Description

Combo XLR and 1/4" TRS inputs accept both Mic and Line Level input while a set of RCA phono inputs (except KSub) allow additional connectivity to portable MP3 players, CD players and line-level mixers. Up to three audio sources can be mixed internally and summed to a balanced output for "daisy-chaining" of multiple units. Separate direct outputs are also provided on each channel for additional output flexibility.


On-board switches provide preset EQ settings. The HF setting (fullrange models) can be set to VOCAL BOOST for additional presence in the critical mid-frequency area or FLAT for accurate reproduction of the incoming signal. The LF switch can be set to NORM, DEEP for additional bass extension, or EXT SUB (fullrange models) for use with an external subwoofer. The rear panel LED switch can be set to POWER, illuminating the front-mounted LED when the unit is powered on, OFF for applications where it is not desirable to illuminate the front LED, or LIMIT which indicates to the system operator that the clip limiter circuit has been engaged during operation.


Fullrange models are housed in rugged ABS enclosures with a professional appearance that is at home in any application. ABS is a far more robust material than conventional speaker plastics and offers an additional measure of sonic clarity due to its internal rigidity. Ergonomic aluminum handles and a highly protective steel grille complete the package for ease of transport and long term durability.


The K Series fullrange models feature a unique Tilt-Direct pole cup mounting system. A simple turn of the dial engages a 7.5 degree downward tilt of the speaker allowing acoustic energy to be kept on the audience and off reflective surfaces for applications where maximum coverage from a high-positioned speaker is desired. Integrated M10 suspension points allow for suspended applications with a K SERIES M10 KIT (sold separately) or Yoke bracket (sold separately).


Remote gain control capability is offered via a potentiometer (not included) connected to the on-board Euroblock connector. In an installed application, multiple K Series speakers can be "daisy-chained" for total gain control from a single remote pot. Auto-standby mode is engaged after 5 minutes of inactivity.
Extensive DSP


DMT (Directivity Matched Transition) provides for matched LF and HF coverage across the entire listening area, eliminating unnatural "dead" or "hot" frequency zones.
Intrinsic Correction, first featured in our high-end line-array products maps 65-75 spacially-averaged measurements to IIR and FIR filters that actively adjust time, frequency and amplitude response to a maximally flat bandpass target. The result is a speaker that behaves equally well across the entire sound field.
DEEP and excursion limiting allow for extended low-frequency response by actively managing low-frequency transients without degradation of the underlying signal or adjacent frequencies.
GuardRail protection, first introduced on our GX Series amplifiers protects both the amplifier module and your performance from unnatural and destructive clipping.

The QSC K Series is quite simply The New Standard in lightweight powered loudspeaker systems. Under the direction of Pat Quilter, QSC's team of amplifier engineers have created a new standard in Class D power modules unparalleled in the industry. Next, breaking from the traditional loudspeaker paradigm, every model is fitted with the identical 1.75" HF device (fullrange models) and woofers of the same high quality for unparalleled performance, regardless of speaker size.


Extensive DSP processing is employed throughout, providing levels of sonic clarity and total output that defy the system's size and weight.


Premium-grade materials, advanced construction processes and multiple mounting and suspension options allow for a wide range of live and installed applications.


Premium-grade materials, advanced construction processes and multiple mounting and suspension options allow for a wide range of live and installed applications.


On-board switches provide preset EQ settings. The HF setting (fullrange models) can be set to VOCAL BOOST for additional presence in the critical mid-frequency area or FLAT for accurate reproduction of the incoming signal. The LF switch can be set to NORM, DEEP for additional bass extension, or EXT SUB (fullrange models) for use with an external subwoofer. The rear panel LED switch can be set to POWER, illuminating the front-mounted LED when the unit is powered on, OFF for applications where it is not desirable to illuminate the front LED, or LIMIT which indicates to the system operator that the clip limiter circuit has been engaged during operation.


Fullrange models are housed in rugged ABS enclosures with a professional appearance that is at home in any application. ABS is a far more robust material than conventional speaker plastics and offers an additional measure of sonic clarity due to its internal rigidity. Ergonomic aluminum handles and a highly protective steel grille complete the package for ease of transport and long term durability.


The K Series fullrange models feature a unique Tilt-Direct pole cup mounting system. A simple turn of the dial engages a 7.5 degree downward tilt of the speaker allowing acoustic energy to be kept on the audience and off reflective surfaces for applications where maximum coverage from a high-positioned speaker is desired. Integrated M10 suspension points allow for suspended applications with a K SERIES M10 KIT (sold separately) or Yoke bracket (sold separately).


Remote gain control capability is offered via a potentiometer (not included) connected to the on-board Euroblock connector. In an installed application, multiple K Series speakers can be "daisy-chained" for total gain control from a single remote pot. Auto-standby mode is engaged after 5 minutes of inactivity. Extensive DSP


DMT (Directivity Matched Transition) provides for matched LF and HF coverage across the entire listening area, eliminating unnatural "dead" or "hot" frequency zones.
Intrinsic Correction, first featured in our high-end line-array products maps 65-75 spacially-averaged measurements to IIR and FIR filters that actively adjust time, frequency and amplitude response to a maximally flat bandpass target. The result is a speaker that behaves equally well across the entire sound field.
DEEP and excursion limiting allow for extended low-frequency response by actively managing low-frequency transients without degradation of the underlying signal or adjacent frequencies.
GuardRail protection, first introduced on our GX Series amplifiers protects both the amplifier module and your performance from unnatural and destructive clipping.

SKU QSC-K12-KIT07
MPN K12-KIT07
Features

The QSC K Series is quite simply The New Standard in lightweight powered loudspeaker systems. Under the direction of Pat Quilter, QSC's team of amplifier engineers have created a new standard in Class D power modules unparalleled in the industry. Next, breaking from the traditional loudspeaker paradigm, every model is fitted with the identical 1.75" HF device (fullrange models) and woofers of the same high quality for unparalleled performance, regardless of speaker size.


Extensive DSP processing is employed throughout, providing levels of sonic clarity and total output that defy the system's size and weight.


Premium-grade materials, advanced construction processes and multiple mounting and suspension options allow for a wide range of live and installed applications.


QSC K12 Features:
  • Lightweight portable powered speakers with legendary QSC amplifier power and reliability
  • 1000 watt Class D power modules in all models
  • Extensive DSP enhances system performance
  • Attractive and professional appearance
  • Rugged ABS enclosures (K8, K10 and K12)
  • Tour-grade 18 gauge steel grilles
  • Ergonomic handles with comfortable, non-slip grip
  • 35 mm pole sockets with Tilt-Direct (fullrange models)
  • M10 rigging points for suspended installation (fullrange models)
  • K10 and K12 perform as main PA or stage monitors

  • Lightweight portable powered speakers with legendary QSC amplifier power and reliability
  • 1000 watt Class D power modules in all models
  • Extensive DSP enhances system performance
  • Attractive and professional appearance
  • Tour-grade 18 gauge steel grilles
  • Ergonomic handles with comfortable, non-slip grip
  • 35 mm pole sockets with Tilt-Direct (fullrange models)
  • M10 rigging points for suspended installation (fullrange models)
Specifications
QSC K12 Specifications:
Configuration
Multipurpose 2-way
Transducers
Low-frequency: 10" cone transducer
High-frequency: 1.75" diaphragm compression driver
Frequency Response (-6 dB)
52 Hz - 18 kHz
Frequency Range (-10 dB)
48 Hz - 20 kHz
Nominal Coverage (-6 dB)
75° conical
Maximum SPL (1 meter)
131 dB peak
Amplifiers
Power Output
1000 W Class D
(500 W LF, 500 W HF)
Input Impedance (ohms)
XLR and 1/4": 40k balanced / 20k unbalanced
XLR and 1/4" MIC mode: 2260 balanced
RCA: 10k
Controls
Power, Gain A, Gain B, Mic/Line, LF Mode (Ext Sub/Norm/DEEP), HF Mode (Flat/Vocal Boost), Front LED (On/Off/Limit)
Indicators
Power, Signal A, Signal B, Standby, Limit, Mic
Connectors
Balanced female XLR and 1/4" line/mic level input, Balanced female XLR and 1/4" line level input, Dual Balanced male XLR full range line level out , Balanced male XLR "mix" out, Stereo RCA line level input, Remote gain control, Locking IEC power connector
Cooling
On demand, 50 mm variable speed fan
Amplifier Protection
Thermal limiting, output overcurrent, overtemperature muting, GuardRail
Transducer Protection
Thermal limiting, excursion limiting
AC Power Input
Universal power supply 85 - 265 VAC, 50 - 60 Hz
AC Power Consumption (1/8 Power)
100 VAC, 2.3 A
120 VAC, 2.01 A
230 VAC, 1.13 A
Enclosure
Material
Impact resistant ABS
Finish
Black paint
Grille
Black powder coated 18 gauge steel
Dimensions (HWD)
23.7" x 14" x 14"
603 mm x 356 mm x 356 mm
Weight (Net)
41 lb / 18.6 kg
Available Accessories
K12 TOTE, K12 YOKE, K SERIES M10 KIT
QSC KSub Specifications:
Configuration
4th Order Bandpass
Transducers, Low-frequency
2 x 12" cone transducers
Frequency Response (-6 dB)
48 Hz - 134 Hz
Frequency Range (-10 dB)
44 Hz - 148 Hz
Maximum SPL (1 meter)
130 dB peak
Amplifiers
Power Output
1000 W Class D (2x500 W)
Input Impedance (ohms)
XLR / 1/4": 40k balanced / 20k unbalanced
Controls
Power, Gain, LF Mode (Normal/DEEP), Polarity (Normal/Reverse), Front LED (On/Off/Limit)
Indicators
Power, Signal, Standby, Limit
Connectors
Dual balanced female XLR/¼" line level input, Dual Balanced male XLR full range line level out, Remote gain control, Locking IEC power connector
Cooling
On demand, 50 mm variable speed fan
On demand, 50 mm variable speed fan
Thermal limiting, output overcurrent, overtemperature muting, GuardRail
Transducer Protection
Thermal limiting, excursion limiting
AC Power Input
Universal power supply 85 - 265 VAC, 50 - 60 Hz
AC Power Consumption (1/8 Power)
100 VAC, 2.3 A
120 VAC, 2.01 A
230 VAC, 1.13 A
Enclosure
Material
Painted birch plywood
Finish
Black textured paint
Dimensions (HWD)
26" x 14" x 28.1" (including casters)
665 mm x 356 mm x 714 mm
Weight (Net)
74 lb / 33.6 kg
Available Accessories
KSub COVER
Package Contents

(2) K12 Speakers

(2) US Plug Power Cables

[100-240V, 50/60Hz]

(2) Owners Manual


(2) KSub Subwoofers

(2) USA Plug Power Cables

[100-240V, 50/60Hz]

(2) M20 Threaded Loudspeaker Poles

(2) Owners Manual

Warranty Details Warranty Information

Product: Period:
QSC K12 6 Years
QSC KSub 6 Years (with registration)
Reviews
  1. Be the first to review this product

Write Your Own Review

Post a product review while logged into your store account for a chance at earning 100 Unique Reward points! (Pending Approval)

  1 star 2 stars 3 stars 4 stars 5 stars
Rating

Description

Description

Combo XLR and 1/4" TRS inputs accept both Mic and Line Level input while a set of RCA phono inputs (except KSub) allow additional connectivity to portable MP3 players, CD players and line-level mixers. Up to three audio sources can be mixed internally and summed to a balanced output for "daisy-chaining" of multiple units. Separate direct outputs are also provided on each channel for additional output flexibility.


On-board switches provide preset EQ settings. The HF setting (fullrange models) can be set to VOCAL BOOST for additional presence in the critical mid-frequency area or FLAT for accurate reproduction of the incoming signal. The LF switch can be set to NORM, DEEP for additional bass extension, or EXT SUB (fullrange models) for use with an external subwoofer. The rear panel LED switch can be set to POWER, illuminating the front-mounted LED when the unit is powered on, OFF for applications where it is not desirable to illuminate the front LED, or LIMIT which indicates to the system operator that the clip limiter circuit has been engaged during operation.


Fullrange models are housed in rugged ABS enclosures with a professional appearance that is at home in any application. ABS is a far more robust material than conventional speaker plastics and offers an additional measure of sonic clarity due to its internal rigidity. Ergonomic aluminum handles and a highly protective steel grille complete the package for ease of transport and long term durability.


The K Series fullrange models feature a unique Tilt-Direct pole cup mounting system. A simple turn of the dial engages a 7.5 degree downward tilt of the speaker allowing acoustic energy to be kept on the audience and off reflective surfaces for applications where maximum coverage from a high-positioned speaker is desired. Integrated M10 suspension points allow for suspended applications with a K SERIES M10 KIT (sold separately) or Yoke bracket (sold separately).


Remote gain control capability is offered via a potentiometer (not included) connected to the on-board Euroblock connector. In an installed application, multiple K Series speakers can be "daisy-chained" for total gain control from a single remote pot. Auto-standby mode is engaged after 5 minutes of inactivity.
Extensive DSP


DMT (Directivity Matched Transition) provides for matched LF and HF coverage across the entire listening area, eliminating unnatural "dead" or "hot" frequency zones.
Intrinsic Correction, first featured in our high-end line-array products maps 65-75 spacially-averaged measurements to IIR and FIR filters that actively adjust time, frequency and amplitude response to a maximally flat bandpass target. The result is a speaker that behaves equally well across the entire sound field.
DEEP and excursion limiting allow for extended low-frequency response by actively managing low-frequency transients without degradation of the underlying signal or adjacent frequencies.
GuardRail protection, first introduced on our GX Series amplifiers protects both the amplifier module and your performance from unnatural and destructive clipping.

The QSC K Series is quite simply The New Standard in lightweight powered loudspeaker systems. Under the direction of Pat Quilter, QSC's team of amplifier engineers have created a new standard in Class D power modules unparalleled in the industry. Next, breaking from the traditional loudspeaker paradigm, every model is fitted with the identical 1.75" HF device (fullrange models) and woofers of the same high quality for unparalleled performance, regardless of speaker size.


Extensive DSP processing is employed throughout, providing levels of sonic clarity and total output that defy the system's size and weight.


Premium-grade materials, advanced construction processes and multiple mounting and suspension options allow for a wide range of live and installed applications.


Premium-grade materials, advanced construction processes and multiple mounting and suspension options allow for a wide range of live and installed applications.


On-board switches provide preset EQ settings. The HF setting (fullrange models) can be set to VOCAL BOOST for additional presence in the critical mid-frequency area or FLAT for accurate reproduction of the incoming signal. The LF switch can be set to NORM, DEEP for additional bass extension, or EXT SUB (fullrange models) for use with an external subwoofer. The rear panel LED switch can be set to POWER, illuminating the front-mounted LED when the unit is powered on, OFF for applications where it is not desirable to illuminate the front LED, or LIMIT which indicates to the system operator that the clip limiter circuit has been engaged during operation.


Fullrange models are housed in rugged ABS enclosures with a professional appearance that is at home in any application. ABS is a far more robust material than conventional speaker plastics and offers an additional measure of sonic clarity due to its internal rigidity. Ergonomic aluminum handles and a highly protective steel grille complete the package for ease of transport and long term durability.


The K Series fullrange models feature a unique Tilt-Direct pole cup mounting system. A simple turn of the dial engages a 7.5 degree downward tilt of the speaker allowing acoustic energy to be kept on the audience and off reflective surfaces for applications where maximum coverage from a high-positioned speaker is desired. Integrated M10 suspension points allow for suspended applications with a K SERIES M10 KIT (sold separately) or Yoke bracket (sold separately).


Remote gain control capability is offered via a potentiometer (not included) connected to the on-board Euroblock connector. In an installed application, multiple K Series speakers can be "daisy-chained" for total gain control from a single remote pot. Auto-standby mode is engaged after 5 minutes of inactivity. Extensive DSP


DMT (Directivity Matched Transition) provides for matched LF and HF coverage across the entire listening area, eliminating unnatural "dead" or "hot" frequency zones.
Intrinsic Correction, first featured in our high-end line-array products maps 65-75 spacially-averaged measurements to IIR and FIR filters that actively adjust time, frequency and amplitude response to a maximally flat bandpass target. The result is a speaker that behaves equally well across the entire sound field.
DEEP and excursion limiting allow for extended low-frequency response by actively managing low-frequency transients without degradation of the underlying signal or adjacent frequencies.
GuardRail protection, first introduced on our GX Series amplifiers protects both the amplifier module and your performance from unnatural and destructive clipping.

SKU QSC-K12-KIT07
MPN K12-KIT07

Features

Features

The QSC K Series is quite simply The New Standard in lightweight powered loudspeaker systems. Under the direction of Pat Quilter, QSC's team of amplifier engineers have created a new standard in Class D power modules unparalleled in the industry. Next, breaking from the traditional loudspeaker paradigm, every model is fitted with the identical 1.75" HF device (fullrange models) and woofers of the same high quality for unparalleled performance, regardless of speaker size.


Extensive DSP processing is employed throughout, providing levels of sonic clarity and total output that defy the system's size and weight.


Premium-grade materials, advanced construction processes and multiple mounting and suspension options allow for a wide range of live and installed applications.


QSC K12 Features:
  • Lightweight portable powered speakers with legendary QSC amplifier power and reliability
  • 1000 watt Class D power modules in all models
  • Extensive DSP enhances system performance
  • Attractive and professional appearance
  • Rugged ABS enclosures (K8, K10 and K12)
  • Tour-grade 18 gauge steel grilles
  • Ergonomic handles with comfortable, non-slip grip
  • 35 mm pole sockets with Tilt-Direct (fullrange models)
  • M10 rigging points for suspended installation (fullrange models)
  • K10 and K12 perform as main PA or stage monitors

  • Lightweight portable powered speakers with legendary QSC amplifier power and reliability
  • 1000 watt Class D power modules in all models
  • Extensive DSP enhances system performance
  • Attractive and professional appearance
  • Tour-grade 18 gauge steel grilles
  • Ergonomic handles with comfortable, non-slip grip
  • 35 mm pole sockets with Tilt-Direct (fullrange models)
  • M10 rigging points for suspended installation (fullrange models)

Specs

Specifications
QSC K12 Specifications:
Configuration
Multipurpose 2-way
Transducers
Low-frequency: 10" cone transducer
High-frequency: 1.75" diaphragm compression driver
Frequency Response (-6 dB)
52 Hz - 18 kHz
Frequency Range (-10 dB)
48 Hz - 20 kHz
Nominal Coverage (-6 dB)
75° conical
Maximum SPL (1 meter)
131 dB peak
Amplifiers
Power Output
1000 W Class D
(500 W LF, 500 W HF)
Input Impedance (ohms)
XLR and 1/4": 40k balanced / 20k unbalanced
XLR and 1/4" MIC mode: 2260 balanced
RCA: 10k
Controls
Power, Gain A, Gain B, Mic/Line, LF Mode (Ext Sub/Norm/DEEP), HF Mode (Flat/Vocal Boost), Front LED (On/Off/Limit)
Indicators
Power, Signal A, Signal B, Standby, Limit, Mic
Connectors
Balanced female XLR and 1/4" line/mic level input, Balanced female XLR and 1/4" line level input, Dual Balanced male XLR full range line level out , Balanced male XLR "mix" out, Stereo RCA line level input, Remote gain control, Locking IEC power connector
Cooling
On demand, 50 mm variable speed fan
Amplifier Protection
Thermal limiting, output overcurrent, overtemperature muting, GuardRail
Transducer Protection
Thermal limiting, excursion limiting
AC Power Input
Universal power supply 85 - 265 VAC, 50 - 60 Hz
AC Power Consumption (1/8 Power)
100 VAC, 2.3 A
120 VAC, 2.01 A
230 VAC, 1.13 A
Enclosure
Material
Impact resistant ABS
Finish
Black paint
Grille
Black powder coated 18 gauge steel
Dimensions (HWD)
23.7" x 14" x 14"
603 mm x 356 mm x 356 mm
Weight (Net)
41 lb / 18.6 kg
Available Accessories
K12 TOTE, K12 YOKE, K SERIES M10 KIT
QSC KSub Specifications:
Configuration
4th Order Bandpass
Transducers, Low-frequency
2 x 12" cone transducers
Frequency Response (-6 dB)
48 Hz - 134 Hz
Frequency Range (-10 dB)
44 Hz - 148 Hz
Maximum SPL (1 meter)
130 dB peak
Amplifiers
Power Output
1000 W Class D (2x500 W)
Input Impedance (ohms)
XLR / 1/4": 40k balanced / 20k unbalanced
Controls
Power, Gain, LF Mode (Normal/DEEP), Polarity (Normal/Reverse), Front LED (On/Off/Limit)
Indicators
Power, Signal, Standby, Limit
Connectors
Dual balanced female XLR/¼" line level input, Dual Balanced male XLR full range line level out, Remote gain control, Locking IEC power connector
Cooling
On demand, 50 mm variable speed fan
On demand, 50 mm variable speed fan
Thermal limiting, output overcurrent, overtemperature muting, GuardRail
Transducer Protection
Thermal limiting, excursion limiting
AC Power Input
Universal power supply 85 - 265 VAC, 50 - 60 Hz
AC Power Consumption (1/8 Power)
100 VAC, 2.3 A
120 VAC, 2.01 A
230 VAC, 1.13 A
Enclosure
Material
Painted birch plywood
Finish
Black textured paint
Dimensions (HWD)
26" x 14" x 28.1" (including casters)
665 mm x 356 mm x 714 mm
Weight (Net)
74 lb / 33.6 kg
Available Accessories
KSub COVER

Contents

Package Contents

(2) K12 Speakers

(2) US Plug Power Cables

[100-240V, 50/60Hz]

(2) Owners Manual


(2) KSub Subwoofers

(2) USA Plug Power Cables

[100-240V, 50/60Hz]

(2) M20 Threaded Loudspeaker Poles

(2) Owners Manual

Warranty

Warranty Details Warranty Information

Product: Period:
QSC K12 6 Years
QSC KSub 6 Years (with registration)

Reviews

Reviews
  1. Be the first to review this product

Write Your Own Review

Post a product review while logged into your store account for a chance at earning 100 Unique Reward points! (Pending Approval)

  1 star 2 stars 3 stars 4 stars 5 stars
Rating