- Home
- DJ Equipment
- Audio Mixers
- DJ MIxers
- Rane Sixty-Eight DJ Mixer
“Make Offer" is the best way to get the lowest price on gear. Enter contact info, provide an offer and click the "Make Offer" button. Our pricing team will review your offer and in the event that your offer is too low a counter offer will be sent. You are free to accept or decline. Inventory is not secured until checkout and availability is subject to change.
- Two independent USB 2.0 High Speed ports, each supporting twenty-two, 32-bit floating-point audio channels at 48 kHz.
- Real-time support for two computers
- Support for 2, 3 or 4 Virtual Decks on one or two computers
- Direct control of over 30 Scratch Live Library, Cue and Loop functions
- Unique FlexFx bus
- Process a sub-mix of up to six audio channels
- Six internal effects with seamless on-beat switching between effects
- External analog insert support for legacy hardware effects
- USB insert support for computer-based effects
- Four full-featured input channels
- Four stereo Phono/CD inputs of Line, Phono or S/PDIF
- Four stereo auxiliary inputs
- Four stereo USB playback options
- Two mic inputs: one with phantom power and one with line-level
- 3-band full-cut EQ, plus new High-pass / Low-pass Filter
- Flexible USB recording options, record from any PGM or output
- Internal universal switching power supply (100-230 VAC)
Introducing the first professional DJ mixer with two USB 2.0 High Speed ports with support for real-time connection of two computers. Two DJs can work in parallel and/or seamlessly transition from one DJ to another.
The Sixty-Eight Mixer has so many controls, you might not know where to start. Taking the mixer one section at a time, it's easier to comprehend. Click on the image above to open an interactive page showing each section and the controls within it (click on any section).
PGM Inputs 1-4The Sixty-Eight has four stereo analog inputs for PGM 1 through PGM 4. Any of these analog inputs may be set for Phono Input, Line Input or S/PDIF using the P - L - S switches on the rear panel. Any of the four analog inputs may be used for Scratch Live vinyl emulation control. Input 1 or Input 2 may be selected for Scratch Live Virtual Deck 1 control. Input 3 or 4 may be selected for Scratch Live Virtual Deck 2 control. Control input sources are selected in Scratch Live.
Mic InputsThe Mic Inputs accept an XLR or a balanced or unbalanced 1/4" plug. Mic 1 has a switchable phantom power option, and Mic 2 has a switchable line level option.
Analog OutputsAll analog outputs come from the same “Main Mix” signal. Main, Booth and Session outputs each have their own Level control. The Main output is on balanced XLR jacks. The Booth output is on balanced 1/4 TRS (tip-ring-sleeve) jacks, though unbalanced TS (tip-sleeve) plugs may be used. The Session output is on regular unbalanced RCA jacks. Because all signals are identical, users may use any of these outputs as the “main” output if a different cable type is required for connection.
| TC Helicon VoiceTone Create XT Specifications |
|---|
| Analog Inputs |
| 4 Stereo, Unbalanced RCA jacks Phono, Line-level or S/PDIF input switches Phono Response: RIAA ±1 dB, Gain: 30 dB at 1 kHz Max Phono Input 150 mV Max Line Input 4 Vrms |
| S/PDIF Inputs |
| 16-bit or 24-bit PCM only SRC output is always 24-bit Input sample rate 16 kHz to 144 kHz SRC output sample rate is always 48 kHz |
| ADCs |
| 24-bit, 48 kHz; Dynamic range 101 dB A-weighted |
| DACs |
| 24-bit, 48 kHz; Dynamic range 107 dB A-weighted |
| Digital Signal Processing |
| 48 kHz, 32-bit floating point |
| USB Audio |
| Six Stereo Record, Five Stereo Playback 48 kHz, 32-bit floating point |
| Mic Inputs |
| Active Balanced: 1/4" & XLR combination jack Tone Controls: 2-Band Mic 1 has +48V Phantom Power on/off switch Mic 2 has Mic/Line-level switch |
| Line Outputs |
| Frequency Response 20 Hz to 20 kHz ±0.25 dB, Line in to Line out THD+N less than 0.01% re 0 dBFS, 20 to 20 kHz, 20 kHz BW Unbalanced jacks maximum 4 Vrms (RCA & FlexFX) Stereo balanced jacks maximum 8 Vrms (Main & Booth) |
| FlexFX Return |
| Unbalanced 1/4" TS (tip-sleeve) phone jacks |
| FlexFX Send |
| Unbalanced 1/4" (tip-sleeve) TS phone jacks |
| Universal Power Supply |
| 100 to 240 VAC, 50 Hz to 60 Hz, 15 W max |
| USB Power |
| Mixer is self-powered |
| Unit size |
| 14.3"H x 12"W x 4"D (36.4 cm x 30.5 cm x 10.2 cm) |
| Weight |
| 11.3 lb (5.2 kg) |
| Shipping Size |
| 7.75"H x 15"W x 19.25"D (19.7 cm x 38.1 cm x 49 cm) |
| Weight |
| 16 lb (7.26 kg) |
| Scratch Live Requirments |
| Mac |
| Intel Core Duo 1.8 GHz 2 GB RAM 1024 x 768 minimum screen resolution OSX 10.3.9 or higher |
| Windows |
| Pentium 4, 2 GHz (Intel processor) 2 GB RAM 1024 x 768 minimum screen resolution Windows XP with Service Pack 2 or higher Windows Vista with Service Pack 2 or higher Windows 7 Note that we recommend Windows 7 over Vista Please note: this is the minimum requirement to run Scratch Live. We recommend you use a higher spec computer, and particularly if you have a large library or use plugins, you will benefit from having more RAM. |
| Product: | Period: |
| Rane Sixty Eight Mixer | 1 Year |
-
- (1) Rane Sixty Eight Mixer
- (1) External Power Supply [120V 60Hz]
- (1) Scratch Live 2.0 CD
- (1) Manual
