- Home
- Recording
- Microphones
- Condenser Microphones
- Shure Beta87a - Handheld Condenser Microphone with Cable
Please login or give us an email to make an offer.
Already have an account?
No Account? Provide your email.
Or Sign in with Facebook.
Request a New Password.
“Make Offer" is the best way to get the lowest price on gear. Enter contact info, provide an offer and click the "Make Offer" button. Our pricing team will review your offer and in the event that your offer is too low a counter offer will be sent. You are free to accept or decline. Inventory is not secured until checkout and availability is subject to change.
Shure Beta 87A Vocal Microphone Features:
- Smooth frequency response with gradual presence rise
- Highly consistent supercardioid polar pattern provides superior gain-before-feedback
- Electronic low-frequency roll-off compensates for proximity effect
- Wide dynamic range (117 dB) and low distortion characteristics
- Very low susceptibility to RFI and electromagnetic hum
- Advanced cartridge shock-mount system absorbs mechanical shocks + reduces handling noise
- Built-in pop filter reduces undesirable wind and breath sounds
- Legendary Shure quality and reliability
| Shure Beta 87A Vocal Microphone Specifications: |
|---|
| Cartridge Type |
| Condenser (electret bias) |
| Frequency Response |
| 50 to 20,000 Hz |
| Polar Pattern |
| Supercardioid |
| Output Impedance |
| Rated at 150 ohms (100 ohms actual +/- 20%) Recommended minimum load impedance: 800 ohms |
| Sensitivity (at 1,000 Hz) |
| Open Circuit Voltage -52.5 dBV/Pa (2 mV) (1 Pa = 94 dB SPL) |
| Clipping Level (at 1,000 Hz) |
| 1000 ohm Load: -6 dBV (0.5 V) |
| Maximum SPL (at 1,000 Hz) |
| 140.5 dB (0.25% THD, 1000 ohm load) |
| Self-Noise |
| (equivalent sound pressure level; measured with true rms voltmeter) 23.5 dB typical, A-weighted 25.5 dB typical, weighted per DIN 45 405 |
| Dynamic Range |
| 117 dB (maximum SPL to A-weighted noise level) |
| Signal-to-Noise Ratio |
| 70.5 dB at 94 dB SPL (IEC 651) (S/N ratio is difference between 94 dB SPL and equivalent SPL of self-noise A-weighted.) |
| Polarity |
| Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 |
| Power |
| Phantom Supply Requirement: 11 to 52 Vdc, positive at both pins 2 and 3 Current Drain: 1.0 to 1.2 mA |
| Connector |
| Three-pin (XLR) professional audio |
| Case |
| Aluminum construction with blue metallic finish, and hardened steel grille with nickel satin chrome plating |
| Net Weight |
| 207 grams (7.6 oz) |
Warranty Information
| Product: | Period: |
| Shure Beta 87a | 2 Years |
Package Contents
-
- (1) Shure Beta 87a Microphone
- (1) 5/8 to 3/8" (Euro) Thread Adapter
- (1) Storage Bag
- (1) Adjustable Stand Adapter
- (1) Warranty Registration Card
- (1) Owner's Manual
Includes:
- (1) Whirlwind XLR 20' Cable
