- Home
- Live Sound
- Microphones
- Wireless Microphones
- Shure PSM 200 - Wireless In-ear Personal Monitor System
“Make Offer" is the best way to get the lowest price on gear. Enter contact info, provide an offer and click the "Make Offer" button. Our pricing team will review your offer and in the event that your offer is too low a counter offer will be sent. You are free to accept or decline. Inventory is not secured until checkout and availability is subject to change.
- Built-in audio limiter
- Front mounted antenna
- Two mic/line input channels for mix control
- 1/2 Rack space
- Operates as a wired or wireless bodypack, or both simultaneously
- Frequency locator
- Built-in headphone limiter
- Integrated cable management
- High-impact plastic chassis
- 1/4" Line input jack with high/low gain switch
- Detailed Sound with Resonant Bass
- Sound Isolating Design
- Speaker Type: Single Dynamic MicroSpeaker II
- Included Fit Kit
The P2T TransMixer is breakthrough design for personal monitoring. It allows the user to connect two line-level or miclevel inputs directly into the transmitter. The two signals can then be mixed independently. You can connect microphones or instruments directly to the inputs or use line outputs from a mixing console. In short, no matter what the output device, you can probably plug it into the TransMixer. For use with PSM 200 monitors.
P2R Hybrid Bodypack ReceiverThe P2R Hybrid Bodypack Receiver is the world's first bodypack receiver to function as a wired receiver, a wireless receiver, or both at the same time. This and other unique features, along with excellent sound quality, make the P2R an exceptional value.
SE115 Sound Isolating EarphonesThe compact SE115 is a perfect introduction to the stunning performance of Shure earphones and come in a variety of color and cable configurations. Second Generation Dynamic MicroDrivers deliver warm, detailed sound with resonant bass. Modular cable solution provided with color versions (black, red, blue and pink) provide flexible wearing options for on-the go-use, while NEW clear model has 64-inch fixed cable making it ideal for stage use or other low-profile applications.
Evolved from earphone technology road-tested by pro musicians and perfected by Shure engineers, the compact SE115 delivers a warm, detailed audio listening experience with resonant bass that's free from outside noise. Included accessories and choice of cable configuration and color provide unmatched comfort, portability and customization.
The SE115 features 2nd Generation Dynamic MicroDrivers to deliver detailed, warm, sound quality with resonant bass. Rediscover your favorite music—richer and more lifelike than you’ve ever heard it.
Based on extensive user feedback, Shure engineers developed a modular cable solution to enable unmatched personal customization. An included 36-inch cable allows you to tailor your experience depending on activity and application. The SE115 clear version comes in a low profile clear with a fixed cable design, ideal for stage use.
Included sound isolating sleeves block up to 37 dB of ambient noise. Combined with a low-profile ergonomic design and fixed or modular cable options, interruptions from the outside world are minimized. Shure Sound Isolating Earphones require a proper fit to achieve the best sound.
Because every ear is different, the Fit Kit includes three sizes (S, M, L) of the Soft Flex and Black Foam Sleeves. A good seal is key to optimizing sound isolation and bass response as well as maximizing comfort during extended wear.
| P2T Wireless Transmixer Specifications: |
|---|
| RF Output Power |
| 30 mW (+15 dBm) typical conducted (country dependent) |
| Modulation Limiter |
| Internal peak limiter (>10:1 hard knee compression) |
| Antenna |
| 1/4 Wavelength, semi-rigid, PCB Mount |
| P2T Audio Input |
| P2T Audio Input Connector Type: XLR-1/4-inch combo Configuration: electronically balanced Actual Impedance: 1 kilohm Nominal Input Level: 25 dBu @ 1/2 volume (12 o'clock) Maximum Input Level: 5 dBu @ 1/2 volume (12 o'clock) Pin Assignments: XLR: 2=hot; 3=cold, 1=ground 1/4: Tip = hot, Ring = cold, Sleeve=ground Phantom Power Protection? Yes: Up to 52 Vdc Current: 170 mA maximum |
| P2T Audio Outputs |
| Passive connection parallel with input: Connector Type: XLR Configuration: electronically balanced Pin Assignments: 2 = hot ; 3 = cold, 1 = ground Phantom Power Protection? Yes: Up to 52 Vdc |
| Power Requirements |
| Operating voltage 12-18 Vdc |
| Dimensions |
| 220 mm x 140 mm x 40 mm (8.6 in. x 5.6 in. x 1.7 in.) |
| Net Weight |
| 370 g (13 oz.) |
| P2R Hybrid Bodypack Receiver Specifications: |
| Operating Controls |
| Volume knob, Frequency select |
| LED Indicators |
| Power, RF reception, Frequency, Limiter, Low battery |
| RF Sensitivity |
| -109 dBm typical |
| Squelch Threshold |
| -102 dBm typical |
| Antenna |
| Attached Whip |
| Audio Input Connector |
| Connector Type: 1/4-inch Mono Impedance: 1 megohm Maximum Input Level: LO = +0 dBu; HI = 10 dBu Frequency Response: 30 Hz to 20 kHz (+/-3 dB); earphone dependent |
| Power Requirements |
| 9 V alkaline battery, Duracell® type MN1604 recommended |
| Battery Life (Volume Dependent) |
| Wired (RF Off): 6 hours Wireless (RF On): 4 hours |
| Audio Output Connector |
| 1/8 inch (3.5 mm) |
| Minimum Load Impedance |
| 8 ohms |
| Net Weight |
| 100 g (3.52 oz.), less battery |
| Overall Dimensions |
| 122 mm x 73 mm x 32 mm (4.809 in. x 2.875 in. x 1.251 in.) |
| SE115 Sound Isolating Earphones Specifications: |
| Speaker Type |
| Dynamic MicroDriver II |
| Sensitivity (1mW) |
| 105 dB SPL/mW |
| Impedance (1kHz) |
| 16 Ohms |
| Frequency Range |
| 22Hz – 17.5kHz |
| Cable Length |
| Black, Red, Blue Pink (with Extension): 54 inch Clear: 64 inch fixed cable |
| Product: | Period: |
| Shure P2TR115LCL PSM200 System | 1 Year |
-
- (1) P2T Wireless TransMixer
- (1) USA Plug Ext. Power Supply
- [120V Power]
- (1) P2R Hybrid Bodypack Receiver
- (1) Zipper Case for P2R
- (1) SE115-CL Earphones (Clear)
- (1) Fit Kit for SE115
- (1) Case for SE115 Earphone
- (1) 9-Volt Battery
- (1) 1/4" Mono Audio Cable
- (1) Rackmount Hardware Set
- (1) User manual
