Tascam UH-7000 Audio Interface
4-channel USB Audio Interface/Mic Preamp with HDIA Preamps
The UH-7000 is a pro-level microphone preamp and audio interface, designed with a strong focus on low noise and high audio quality. Not only can this unit be used as a 4-in/4-out audio interface in a DAW production environment, but as a standalone microphone preamp and AD/DA converter. The built-in HDIA (High Definition Instrumentation Architecture) microphone preamps are newly designed with low noise and high audio quality. These impressive mic pres perform at −128dBu EIN, a 117dB signal-to-noise ratio and distortion ratio of 0.0009% or less.
The grand nature of the UH-7000's sound is partially due to the careful attention spent on selecting parts. In addition to the Burr-Brown PCM4220 ADC, PCM1795 DAC converters and thin film metal resistors, installed is a powerful TCXO clock generator with +/−1ppm precision.
The unit's half-rack size makes it easy to install at a studio console or work desk. The thick aluminum panels on the front and sides of the full-metal body increase stability. Highly important but easily forgotten are the smooth-tension aluminum input level knobs for precise level adjustments.
The UH-7000 microphone preamp and audio interface enables composers, musicians and recording engineers to produce music in their private quarters at a level only reached in professional studios.
- To stay up to date with the latest driver versions, no CD-ROM or other media is included with the package. Users should download and use the latest drivers from our website.
- When operating at 88.2kHz or 96kHz, only one of the effects (dynamics or send) can be used.
- When operating at 176.4kHz or 192kHz, no effects can be used.
- During standalone operation, the built-in DSP mixer settings cannot be changed.
- Even being use in the standalone mode for micpre, output signal go through internal digital circuit.
- Turning LINK LINE OFF with the button will cause the signal level at the ANALOG (BALANCED) OUTPUT L/R connectors to revert to full line level loudness. When turning the LINK LINE OFF, check and adjust the levels on the currently playing audio and connected monitoring equipment first.